+7 (921) 228-15-05, +7 (8142) 70-07-64
VBG — компания основана в 1951 году, продукция отлично зарекомендовала себя на Севере Европы в жестких климатических условиях. Устройства компании получили признание в лесной промышленности: они установлены на большинстве лесовозов. Серийно устанавливаются на SCANIA и VOLVO. Завод располагается в городе Венесборг (Швеция).
Запасные части дня лесовозной и карьерной техники
Spare parts for forestry and quarry machinery
JYKI, ISTRAIL, BRIAB, KOME, SISU, VOLVO, SCANIA, IVECO, CAT, KAMAZ, НОВТРАК, VBG, KESLA
Наша компания поставляет широкий ассортимент запасных частей для тягово-сцепных устройств VBG, в том числе ремонтные комплекты для моделей 8500, 5190D и 750V / 795V. Высокое качество продукции подтверждено сертификатами и гарантийными обязательствами.
__f773_9e.jpg)
__f774_c3.jpg)
__f777_fe.jpg)
__f572_4f.jpg)
__f573_d3.jpg)
__f574_23.jpg)
__f576_ea.jpg)
__f650_59.jpg)
__f577_c5.jpg)
__f578_0b.jpg)
__f579_32.jpg)
__f575_e5.jpg)
| п\н | Наименование | Артикул |
|---|---|---|
| 1 | Nut cover, incl. split pin 750V/795V | 09-065400 |
| 2 | Nut cover, incl. split pin 795VR | 09-125400 |
| 3 | Castellated nut | 36-021800 |
| 4 | Bearing plate, inner | 18-054900 |
| 5 | Bearing box kit 795VR, inner | 09-125500 |
| 6 | Bolt kit | 05-063400 |
| 7 | Rubber bearing kit 750V/795V | 09-066200 |
| 8 | Rubber bearing kit 795VR | 09-178400 |
| 9 | Drawbeam sleeve VBG 795V | 09-067300 |
| 10 | Drawbeam sleeve VBG 750V | 09-067200 |
| 11 | Drawbeam sleeve VBG 795VR | 09-125700 |
| 12 | Bearing plate, outer 750V/795V | 18-054700 |
| 13 | Bearing plate, outer 795VR | 09-125800 |
| 14 | Bushing | 09-068400 |
| 15 | Bar spacer washer 4 mm kit | 18-003000 |
| 16 | Bar spacer washer 10 mm | 18-066400 |
| 17 | Screw kit for mechanism cover | 09-123600 |
| 18 | Handle left | 09-123200 |
| 19 | Signal pin kit | 09-126300 |
| 20 | Indicator & locking device | 09-122800 |
| 21 | Indicator & locking device | 09-181300 |
| 22 | Mechanism cover complete kit | 09-123100 |
| 23 | Bolt kit | 09-120800 |
| 24 | Grease plug, 10-pack | 09-177500 |
| 25 | Grease plug, 3-pack | 09-127000 |
| 26 | Mechanism | 09-119000 |
| 27 | Plastic plug | 09-127100 |
| 28 | Guiding funnel 795V/795VR | 09-069700 |
| 29 | Guiding funnel 750V | 09-069800 |
| 30 | Wear plate (1 kit used for 750V and 2 kits for 795V/795VR) | 09-066100 |
| 31 | Coupling jaw 795V/795VR | 09-067100 |
| 32 | Coupling jaw 750V | 09-067000 |
| 33 | Cap | 09-123700 |
| 34 | Handle right | 09-123300 |
| 35 | Sleeve kit for handle 67 mm (for moving handle from left to right side) | 09-126400 |
| 36 | Closing spring kit | 09-126500 |
| 37 | Sealing kit, cover | 09-177600 |
| 38 | Protective insert | 09-014500 |
| 39 | Conversion kit 3.0 | 09-119700 |
| 40 | Conversion kit 3.0, incl Sensor compl | 09-120100 |
| 41 | Renovation kit VBG 750V/795V | 09-119500 |
| 42 | Renovation kit VBG 750V/795V incl Sensor compl | 09-119900 |
| 43 | Renovation kit VBG 795VR | 09-178500 |
| 44 | Nut cover | 18-000400 |
| 45 | Castellated nut | 18-000300 |
| 46 | Lock kit, castle nut | 09-125000 |
| 47 | Washer 6 mm | 18-015700 |
| 48 | Nut washer | 18-076600 |
| 49 | Bearing plate kit | 18-003800 |
| 50 | Rubber block kit | 18-003500 |
| 51 | Beam plates incl. screw | 18-075300 |
| 52 | Handle left | 09-123200 |
| 53 | Signal pin kit | 09-126300 |
| 54 | Indicator & locking device | 09-122800 |
| 55 | Indicator & locking device | 09-181300 |
| 56 | Plastic plug | 09-127100 |
| 57 | Mechanism VBG 760 | 09-120200 |
| 58 | Grease plug, 10-pack | 09-177500 |
| 59 | Grease plug, 3-pack | 09-127000 |
| 60 | Screw kit | 09-119300 |
| 61 | Mechanism cover kit | 09-123100 |
| 62 | Screw kit for mechanism cover | 09-123600 |
| 63 | Bushing kit VBG 760 | 18-000800 |
| 64 | Coupling jaw VBG 760 incl. castellated nut | 05-078700 |
| 65 | Cap | 09-123700 |
| 66 | Handle right | 09-123300 |
| 67 | Sleeve kit for handle 67 mm (for moving handle from left to right side) | 09-126400 |
| 68 | Closing spring kit | 09-126500 |
| 69 | Sealing kit, cover | 09-177600 |
| 70 | Conversion kit 3.0 | 09-120300 |
| 71 | Conversion kit 3.0 incl Sensor complete | 09-120400 |
| 72 | Cotter | 09-126200 |
| 73 | Castellated nut | 36-021800 |
| 74 | Bearing box | 18-054900 |
| 75 | Rubber element insert | 09-125900 |
| 76 | Drawbeam sleeve | 09-126000 |
| 77 | Bolt kit | 09-126100 |
| 78 | Coupling jaw | 09-067100 |
| 79 | Bushing kit | 09-068400 |
| 80 | Guiding funnel | 09-069700 |
| 81 | Wear plate kit, 2 kits used | 09-066100 |
| 82 | Mechanism | 09-119000 |
| 83 | Screw kit | 09-120800 |
| 84 | Mechanism cover complete kit | 09-123100 |
| 85 | Grease plug, 10-pack | 09-177500 |
| 86 | Grease plug, 3-pack | 09-127000 |
| 87 | Signal pin kit | 09-126300 |
| 88 | Signal and lock pin kit | 09-122800 |
| 89 | Signal and lock pin kit | 09-181300 |
| 90 | Plastic plug | 09-127100 |
| 91 | Screw kit for mechanism cover | 09-123600 |
| 92 | Handle, left | 09-123200 |
| 93 | Cap | 09-123700 |
| 94 | Handle, right | 09-123300 |
| 95 | Sleeve kit for handle 67 mm (for moving handle from left to right side) | 09-126400 |
| 96 | Closing spring kit | 09-126500 |
| 97 | Sealing kit, cover | 09-177600 |
| 98 | Nut cover and split pin 575V/590V | 09-065400 |
| 99 | Nut cover and split pin 590VR | 09-125400 |
| 100 | Castellated nut | 36-021800 |
| 101 | Bearing plate 575V/590V, inne | 18-054900 |
| 102 | Bearing plate kit 590VR, inner | 09-125500 |
| 103 | Bolt kit | 05-063400 |
| 104 | Rubber bearing kit 575V/590V | 09-066200 |
| 105 | Rubber bearing kit 590VR | 09-178400 |
| 106 | Drawbeam sleeve VBG 590V | 09-067300 |
| 107 | Drawbeam sleeve VBG 575V | 09-054200 |
| 108 | Drawbeam sleeve VBG 590VR | 09-125700 |
| 109 | Bearing plate 575V/590V, outer | 18-054700 |
| 110 | Bearing plate 590VR, outer | 09-125800 |
| 111 | Bushing kit | 09-121300 |
| 112 | Bolt kit for mechanism cover | 09-123600 |
| 113 | Handle left | 09-123200 |
| 114 | Signal pin kit | 09-126300 |
| 115 | Indicator & locking device | 09-122800 |
| 116 | Indicator & locking device | 09-181300 |
| 117 | Mechanism cover complete kit | 09-123100 |
| 118 | Bolt kit | 09-120800 |
| 119 | Grease plug, 10-pack | 09-177500 |
| 120 | Grease plug, 3-pack | 09-127000 |
| 121 | Cover kit | 09-120900 |
| 122 | Mechnism | 09-121000 |
| 123 | Plastic plug | 09-127100 |
| 124 | Torsion spring | 18-061400 |
| 125 | Guiding funnel version 2.0 | 09-124100 |
| 126 | Guiding funnel version 3.0 | 09-061073 |
| 127 | Wear plate holder | 09-121200 |
| 128 | Wear plate kit | 09-121100 |
| 129 | Cap | 09-123700 |
| 130 | Handle right | 09-123300 |
| 131 | Sleeve kit for handle 67 mm (for moving handle from left to right side) | 09-126400 |
| 132 | Closing spring kit | 09-126500 |
| 133 | Sealing kit, cover | 09-177600 |
| 134 | Conversion kit 3.0 | 09-121400 |
| 135 | Conversion kit 3.0 incl Bracket kit | 09-121600 |
| 136 | Nut cover | 18-000400 |
| 137 | Castellated nut | 18-000300 |
| 138 | Lock kit, castle nut | 09-125000 |
| 139 | Washer 6 mm | 18-015700 |
| 140 | Nut washer | 18-076600 |
| 141 | Bearing plate kit | 18-003800 |
| 142 | Rubber block kit | 18-003500 |
| 143 | Beam plates incl. screw | 18-075300 |
| 144 | Signal and lock pin kit | 09-181300 |
| 145 | Mechanism VBG 5190D | 09-129400 |
| 146 | Screw kit | 09-119300 |
| 147 | Mechanism cover, kit | 09-123100 |
| 148 | Screw kit for mechanism cover | 09-123600 |
| 149 | Bushing kit VBG 5190D | 09-129300 |
| 150 | Clamp VBG 5190D incl. castellated nut | 09-129200 |
| 151 | Mechanism VBG 8500 | 09-121700 |
| 152 | Bushing kit VBG 8500 | 18-004000 |
| 153 | Coupling jaw VBG 8500 incl. castellated nut | 08-016600 |
| 154 | Mechanism VBG 8040 | 09-122000 |
| 155 | Coupling jaw G160 incl. castellated nut | 08-021100 |
| 156 | Conversion kit 3.0 | 09-122100 |
| 157 | Conversion kit 3.0 incl Sensor complete | 09-122200 |
| 158 | Bearing plate, inner | 18-001100 |
| 159 | Bearing plate, outer | 18-001000 |
| 160 | Jack-knifng stop incl. Rubber damper | 18-068500 |
| 161 | Nipple kit, torsion device (Ø 6, Ø 8) | 07-106800 |
| 162 | Membrane kit | 09-011700 |
| 163 | Clamp ring kit | 09-027300 |
| 164 | Manual indicator and locking device | 18-021400 |
| 165 | Air Cover pin | 07-082000 |
| 166 | Protective plate incl. screw | 07-002400 |
| 167 | Cover | 09-011800 |
| 168 | Piston rod kit | 09-019100 |
| 169 | Screw kit MC6S 12×30 | 18-003400 |
| 170 | Mechanism incl. bushings | 09-027100 |
| 171 | Coupling jaw with bushings | 09-019900 |
| 172 | Bushing kit | 18-000700 |
| 173 | Renovation kit | 09-010000 |
| 174 | Compression spring | 37-045800 |
| 175 | Protective Inser | 09-013800 |
| 176 | Repair kit for release arm | 18-000600 |
| 177 | Nut cover 3000 | 18-001300 |
| 178 | Protective Insert | 09-013700 |
| 179 | Bolt kit for mechanism cover | 09-123600 |
| 180 | Handle left | 09-123200 |
| 181 | Signal pin kit | 09-126300 |
| 182 | Indicator & locking device | 09-122800 |
| 183 | Indicator & locking device | 09-181300 |
| 184 | Jackknife alarm kit | 18-000900 |
| 185 | Washer | 18-010700 |
| 186 | Closing spring kit | 09-126500 |
| 187 | Sealing kit, cove | 09-177600 |
| 188 | Handle right | 09-123300 |
| 189 | Sleeve kit for handle 67 mm (for moving handle from left to right side) | 09-126400 |
| 190 | Conversion kit 3.0 | 09-120600 |
| 191 | Conversion kit 3.0, incl Position sensor | 09-120700 |
| 192 | Castellated nut 2″ | 36-012000 |
| 193 | Lower lip bushing | 05-026200 |
| 194 | Bolt kit for mechanism | 18-001600 |
| 195 | Mechanism incl. bushing | 05-029300 |
| 196 | Mechanism incl. bushing and signal and lock pin | 05-028800 |
| 197 | Plastic plug | 05-023500 |
| 198 | Handle incl | 18-000100 |
| 199 | Lock kit, castle nut | 09-125000 |
| 200 | Bearing plate 1050, inner | 18-001100 |
| 201 | Rubber bearing kit 1050 | 09-017800 |
| 202 | Bolt kit 1050 | 05-063400 |
| 203 | Drawbeam sleeve 1050 incl. | 05-067400 |
| 204 | Bearing plate 1050, outer | 18-001000 |
| 205 | Earth strip 1050 | 18-014300 |
| 206 | Handle incl. split pin | 18-001700 |
| 207 | Bolt kit for Mechanism | 18-001600 |
| 208 | Plastic cap | 18-003700 |
| 209 | Mechanism 1050 incl. | 09-023900 |
| 210 | Locking device 1050 | 18-021400 |
| 211 | Bushing kit 1050 | 18-001500 |
| 212 | Lock bolt repair kit 1050 | 18-001800 |
| 213 | Spring bracket 1050 | 18-020700 |
| 214 | Torsion spring 1050 | 18-020800 |
| 215 | Guiding funnel 1050 | 09-020300 |
| 216 | Bolt kit | 08-100600 |
| 217 | Lock cylinder, kit | 08-101400 |
| 218 | Magnetic sensor | 08-102600 |
| 219 | Inductive sensor | 08-102500 |
| 220 | USS kit truck | 08-102400 |
| 221 | Control panel | 08-102300 |
| 222 | Panel cylinder kit | 08-101300 |
| 223 | Panel kit | 08-100500 |
| 224 | Magnetic sensor, panel | 08-102600 |
| 225 | Cylinder protection | 08-027000 |
| 226 | Valvebox | 08-102700 |
| 227 | Locking key kit | 08-100000 |
| 228 | Locking key cylinder kit | 08-101100 |
| 229 | Power-air unit | 08-100100 |
| 230 | Magnetic sensor | 08-102600 |
| 231 | Power switch 22, kit truck | 08-101900 |
| 232 | Tow fork | 08-100700 |
| 233 | Renovation kit, ball | 08-100200 |
| 234 | USS kit trailer | 08-101800 |
| 235 | Air and electrical connection kit | 08-101000 |
| 236 | Power switch 22, kit trailer | 08-102000 |
| 237 | Brake line kit | 08-101500 |
| 238 | Hook spanner | 08-100400 |
| 239 | Hydraulic cylinder | 39-030100 |
| 240 | Threaded rod M18 | 39-030200 |
| 241 | Nut M18 | 39-030300 |
| 242 | Guide sleeve | 39-030400 |
| 243 | Guide plate | 39-030500 |
| 244 | Spacer tube | 39-030600 |
| 245 | Guide sleeve | 39-030700 |
| 246 | Guide plate | 39-030800 |
| 247 | Guide plate | 39-030900 |
| 248 | Guide plate | 39-031000 |
| 249 | Guide plate | 39-031100 |
| 250 | Guide plate | 39-031200 |
| 251 | Counterbalance clamp | 39-031300 |
| 252 | Counterbalance plate | 39-031400 |
| 253 | USB memory stick | 39-032600 |
| 254 | Adapter kit for drawbar eye 190 | 07-109600 |
| 255 | Adapter kit | 07-109700 |
| 256 | Bolt kit for bracket | 07-107300 |
| 257 | Bracket RB | 07-106500 |
| 258 | Adapter kit | 07-107100 |
| 259 | Bolt kit for bracket | 07-107300 |
| 260 | Bolt kit | 07-107200 |
| 261 | Bracket R | 07-024100 |
| 262 | Bracket L | 07-024200 |
| 263 | Bolt kit | 07-107200 |
| 264 | Actuator | 07-106900 |
| 265 | Nipple kit for actuator | 07-106800 |
| 266 | Bolt kit | 07-107200 |
| 267 | Nipple kit for actuator | 07-106800 |
| 268 | Snap-on connector | 07-109800 |
| 269 | Control box | 07-108000 |
| 270 | Nipple kit for actuator | 07-106800 |
| 271 | Nipple kit | 07-109900 |
| 272 | Bolt kit | 07-108700 |
| 273 | Adapter kit | 07-108600 |
| 274 | Bracket | 09-063600 |
| 275 | Adapter kit | 07-110000 |
| 276 | Washer | 07-110100 |
| 277 | Bracket | 07-037500 |
| 278 | Adapter | 07-107100 |
| 279 | Bolt kit for bracket | 07-107300 |
| 280 | Bracket for actuator | 07-106500 |
| 281 | Bolt kit | 07-107200 |
| 282 | Actuator | 07-106900 |
| 283 | Nipple kit for actuator (Ø 6, Ø 8) | 07-106800 |
| 284 | Control box, complete | 07-107900 |
| 285 | Handle | 07-107600 |
| 286 | Handle | 07-107700 |
| 287 | Control box (without valve) | 07-107800 |
| 288 | Bracket control box | 07-107400 |
| 289 | Nipple kit for control box | 07-107500 |
| 290 | Remote indicator kit | 09-069900 |
| 291 | Bolt kit VBG 575V/590V | 07-108700 |
| 292 | Adapter VBG 575V/590V | 07-108600 |
| 293 | Bracket VBG 575V/590V | 09-063600 |
| 294 | Indicating kit | 09-099200 |
| 295 | Indicating panel incl. cable and nuts | 09-099300 |
| 296 | Electronic unit | 09-099400 |
| 297 | Connector with clip | 09-099500 |
| 298 | Cable 10 m | 09-099600 |
| 299 | Cable 15 m | 09-099700 |
| 300 | Handle | 07-107600 |
| 301 | Handle | 07-107700 |
| 302 | Valve box without valve | 07-107800 |
| 303 | Valve box, complete | 07-107900 |
| 304 | Valve box complete, incl. bracket kit | 07-108000 |
| 305 | Bracket | 07-107400 |
| 306 | Nipple kit | 07-107500 |
| 307 | Plug | 07-108200 |
| 308 | Snap-lock | 07-104400 |
| 309 | Torsion device kit | 07-106900 |
| 310 | Bracket kit 750V/795V/795VR/760/8500/8040 | 09-119400 |
| 311 | Bracket kit 575V/590V/590VR | 09-121500 |
| 312 | Screw kit for bracket | 09-122500 |
| 313 | Screw kit for bracket | 09-179900 |
| 314 | Screw kit for torsion device | 07-107200 |
| 315 | Bracket 750V/795V/795VR/760/8500/8040 | 09-113573 |
| 316 | Bracket 575V/590V/590VR | 09-179773 |
| 317 | Adapter kit | 09-122700 |
| 318 | Indicating kit | 09-099200 |
| 319 | Cabling, 12 m | 09-182600 |
| 320 | Cabling, 16 m | 09-182500 |
| 321 | Screw kit for mechanism cover | 09-123600 |
| 322 | AM unit | 09-124000 |
| 323 | Shaft for AM unit incl. plastic plug (x2) | 09-122300 |
| 324 | Plastic plug for shaft, 10-pack | 09-122400 |
| 325 | Diaphragm kit | 09-068300 |
| 326 | Plug for valve box | 07-108400 |
| 327 | Cover AM | 09-055700 |
| 328 | Protective bracket kit for 750V/795V AM 760 AM, 8500 AM | 09-124973 |
| 329 | Protective bracket kit for 8040 AM | 09-124773 |
| 330 | Protective bracket 575V AM | 09-124873 |
| 331 | Position sensor, complete kit | 09-119800 |
| 332 | Locking key, 10-pack | 09-123000 |
| 333 | Jackknife alarm kit, buzzer included | 09-036500 |
| 334 | Electronic unit | 09-099400 |
| 335 | Connector with clip | 09-099500 |
| 336 | Indicating panel incl. cable and nuts | 09-099300 |
| 337 | Bolt kit for steel beam incl. end stop | 21-043100 |
| 338 | End stop for steel beam | 18-090900 |
| 339 | End stop for aluminium beam 919 | 21-092000 |
| 340 | End stop for aluminium beam UHAP 1.0, kit | 18-004100 |
| 341 | End stop for aluminium beam UHAP 2.0 | 21-173600 |
| 342 | End stop for round steel beam | 21-181300 |
| 343 | Endplate EUR | 21-107478 |
| 344 | Endplate EUR-2 | 21-167578 |
| 345 | Endplate EUS, 50-hole spacing | 21-074070 |
| 346 | Endplate EUS, 60-hole spacing | 21-083170 |
| 347 | Aluminium beam UHAP-1, length 2400 mm | 21-164400 |
| 348 | Aluminium beam UHAP-1 with reflex, length 2400 mm | 21-164500 |
| 349 | Aluminium beam UHAP-1 with reflex, length 1900 mm | 21-164600 |
| 350 | Protective beam with anchor bolts | 21-198000 |
| 351 | Side arm kit 600 | 21-198100 |
| 352 | Side arm kit 1000 | 21-198200 |
| 353 | Leg front 4.3 stamped no 25-0736 or 25-0704 | 25-073678 |
| 354 | Leg front 2.8 stamped no 25-0737 or 25-0710 | 25-073778 |
| 355 | Leg front 2.2 stamped no 25-0738 or 25-0721 | 25-073878 |
| 356 | Leg rear 4.3 stamped no 25-0712 or 25-0705 | 25-071278 |
| 357 | Leg rear 3.6 stamped no 25-0724 or 25-0714 | 25-072478 |
| 358 | Leg rear 2.8 stamped no 25-0713 or 25-0711 | 25-071378 |
| 359 | Leg rear 2.2 stamped no 25-0723 or 25-0722 | 25-072378 |
| 360 | Crossbar L=987 mm | 25-073978 |
| 361 | Crossbar M=738 mm | 25-074078 |
| 362 | Crossbar S=588 mm | 25-074178 |
| 363 | Crossbar XS=417 mm | 25-074278 |
| 364 | Bolt kit M14×130 (5 pcs.) | 35-045600 |
| 365 | Bolt kit crossbar (4 pcs.) | 35-048200 |
| 366 | Spacer tube kit (5 pcs.) | 25-072800 |
| 367 | Eye DIN 40 | 25-073078 |
| 368 | Eye ISO 50 | 25-073178 |
| 369 | Eye VBG 57 | 25-073278 |
| 370 | Eye 57, angled 5˚ | 25-073378 |
| 371 | Balance spring | 26-076000 |
| 372 | Rigging screw | 26-071100 |
| 373 | Holder for power plug | 18-030100 |
| 374 | Spring retainer | 25-054978 |
| 375 | Front part short | 25-087178 |
| 376 | Front part long | 25-087278 |
| 377 | Middle part short | 25-087378 |
| 378 | Middle part long | 25-087478 |
| 379 | Rear part 700 | 25-087578 |
| 380 | Rear part 900/980 | 25-087678 |
| 381 | Rear part 1100/1200 | 25-087778 |
| 382 | Bolt kit M14×130 (5 pcs.) | 35-045600 |
| 383 | Bolt kit M16×140 (10 pcs.) | 35-076500 |
| 384 | Bolt kit M16×160 (16 pcs.) | 35-050700 |
| 385 | Bultsats M14×160 (6 pcs.) | 35-050800 |
| 386 | Eye DIN 40 | 25-073078 |
| 387 | Eye ISO 50 | 25-073178 |
| 388 | Eye VBG 57 | 25-073278 |
| 389 | Eye 57, angled 5˚ | 25-073378 |
| 390 | Rear sliding bracket accessory kit | 25-108478 |
| 391 | Front sliding bracket accessory kit | 25-108578 |
| 392 | Front slider (26-080000) Manufactured to desired measurements | 26-087300 |
| 393 | Front slider (26-100000) Manufactured to desired measurements | 26-100600 |
| 394 | Rear A-frame (26-080000) Manufactured to desired measurements | 26-087400 |
| 395 | Rear A-frame (26-100000) Manufactured to desired measurements | 26-100200 |
| 396 | Wear ring for 57.5 mm Ø VBG tow eye | 18-010400 |
| 397 | Wear ring for 57.5 mm Ø VBG tow eye | 18-010401 |
| 398 | Bush for ISO 50 mm Ø tow eye | 18-088800 |
| 399 | Bush for ISO 50 mm Ø tow eye | 18-088801 |
| 400 | Bush for DIN 40 mm Ø tow eye | 18-013800 |
| 401 | Adjustment bolt assy incl. washers and nuts | 26-096500 |
| 402 | Stop plate | 26-089900 |
| 403 | Wear set (incl. 26-096500 wear plate | 26-096400 |
| 404 | Bushing kit (lower jaw bushing, front bushing) | 18-002500 |
| 405 | Front bushing | 18-083000 |
| 406 | Air cylinder, assy | 18-087000 |
| 407 | Power valve | 07-009000 |
| 408 | Spring retainer | 25-071700 |
| 409 | Coupling jaw | 26-006000 |
| 410 | Bushing upper plate | 26-000900 |
| 411 | Bushing front slider | 26-001000 |
| 412 | Bushing lower plate | 26-001100 |
| 413 | Welding bushing | 26-040200 |
| 414 | Mechanism | 09-117500 |
| 415 | Cover, air cylinder | 18-080900 |
| 416 | Housing, air cylinder | 18-081000 |
| 417 | Lock bolt incl. bushing kit | 18-002600 |
| 418 | Snap-on coupling, 90° | 29-000200 |
| 419 | Snap-on coupling, straight | 29-000800 |
| 420 | Wear plate for vertical play (Qty as required) | 18-089800 |
| 421 | Kit for extra hole or hole repair | 26-096600 |
| 422 | Diaphragm repair kit | 26-087800 |
| 423 | Air cylinder repair kit | 26-087700 |
| 424 | Rebuild kit (for older automatic drawbar models) | 26-075700 |
| 425 | Front slider DIN Ø 40 mm* stamped no: VBG 250500 alt 250430 | 25-043078 |
| 426 | Front slider ISO Ø 50 mm stamped no: VBG 250501 alt 250431 | 25-043178 |
| 427 | Front slider VBG Ø 57 mm stamped no: VBG 250502 alt 250432 | 25-043278 |
| 428 | Mounting plates, leg 1.4 m stamped no: VBG 250506 alt 250433 | 25-043378 |
| 429 | Mounting plates, leg 2.0 m stamped no: VBG 250505 alt 250434 | 25-043478 |
| 430 | Leg, 1.2 m, c/c 1100/1300 stamped no: VBG 250566 alt 250462 | 25-046278 |
| 431 | Leg 1.2 m, c/c 980/1200 stamped no: VBG 250553 alt 250461 | 25-046178 |
| 432 | Leg 1.4 m, c/c 980/1200 stamped no: VBG 250556 alt 250459 | 25-045978 |
| 433 | Leg 1.4 m, c/c 980/1200 stamped no: VBG 250556 alt 250459 | 25-045978 |
| 434 | Leg 1.65 m, c/c 980/1200 stamped no: VBG 250554 alt 250664 | 25-066478 |
| 435 | Leg 1.65 m, c/c 1100/1300 stamped no: VBG 250554 alt 250665 | 25-066578 |
| 436 | Leg 2.0 m, c/c 980/1200 stamped no: VBG 250557 alt 250460 | 25-046078 |
| 437 | Leg 2.2 m, c/c 980/1200 stamped no: VBG 250555 alt 250680 | 25-068078 |
| 438 | Leg 2.2 m, c/c 1100/1300 stamped no: VBG 250555 alt 250681 | 25-068178 |
| 439 | Bolt kit M14, containing ** Screw M6S M14×130, 8.8 (5 pcs.) Locking nut M14 kl.8 (5 pcs.) Washer BRB, HB200 (10 pcs.) | 35-045600 |
| 440 | Balance spring | 26-076000 |
| 441 | Rigging screw | 26-071100 |
| 442 | Power plug bracket | 26-030100 |
| 443 | Spring retainer | 25-054978 |
| 444 | Front slider ISO Ø 50 mm stamped no: VBG 250588 alt 250428 | 25-042878 |
| 445 | Front slider VBG Ø 57 mm stamped no: VBG 250589 alt 250429 | 25-042978 |
| 446 | Mounting plates, leg 1.2, 1.65 stamped no: VBG 250592 alt 250670 | 25-067078 |
| 447 | Mounting plates, leg 2.2 m stamped no: VBG 250593 alt 250679 | 25-067978 |
| 448 | Leg, 1.2 m, c/c 980-1200 stamped no: VBG 250553 alt 250461 | 25-046178 |
| 449 | Leg, 1.2 m, c/c1100-1300 stamped no: VBG 250566 alt 250462 | 25-046278 |
| 450 | Leg 1.65 m, c/c 980/1200 stamped no: VBG 250554 alt 250664 | 25-066478 |
| 451 | Leg 1.65 m, c/c 1100/1300 stamped no: VBG 250554 alt 250665 | 25-066578 |
| 452 | Leg 2.2 m, c/c 980/1200 stamped no: VBG 250555 alt 250680 | 25-068078 |
| 453 | Leg 2.2 m, c/c 1100/1300 stamped no: VBG 250555 alt 250681 | 25-068178 |
| 454 | Crossbar | 25-057678 |
| 455 | Crossmember Bolt kit | 35-047300 |
| 456 | Bolt kit M14, containing* Screw M6S M14×130, 8.8 (5 pcs.) Locking nut M14 kl.8 (5 pcs.) Washer BRB, HB200 (10 pcs.) | 35-045600 |
| 457 | Bolt kit M16, containing * Screw M6S M16×140, 8.8 (6 pcs.) Locking nut M16 8 o’ clock (6 pcs.) Washer BRB, HB200 (12 pcs.) | 35-047200 |
| 458 | Balance spring | 26-076000 |
| 459 | Rigging screw | 26-071100 |
| 460 | Plug holder | 18-030100 |
| 461 | Spring retainer | 25-054978 |
| 462 | Hinge bracket with ftted Silent block 32 stamped no: VBG 250638 alt 250734 | 25-073478 |
| 463 | Hinge bracket with ftted type Briab stamped no: VBG 250639 alt 250735 | 25-073578 |
| 464 | Rear bracket incl. sleeve, for nylon bushing Ø 25-35 mm and Vibra block Ø 32 mm | 25-013000 |
| 465 | Rear bracket incl. sleeve For Vibra block Ø 34 mm | 25-013200 |
| 466 | Silent block Ø 32 mm | 26-050700 |
| 467 | Silent block Ø 34 mm | 26-050800 |
| 468 | Nylon bushing Ø 30 mm | 26-050300 |
| 469 | Nylon bushing Ø 32 mm | 26-050200 |
| 470 | Nylon bushing Ø 34 mm | 26-050600 |
| 471 | Nylon bushing Ø 35 mm | 26-054000 |
| 472 | Spring bolt Ø 30 mm, incl. locking nut | 18-055600 |
| 473 | Spring bolt zinc plated Ø 32 mm, incl. locking nut | 18-057800 |
| 474 | Spring bolt Ø 34 mm, incl. locking nut | 18-055800 |
| 475 | Spring bolt Ø 35 mm, incl. locking nut | 18-055700 |
| 476 | Sleeve, width 100 mm | 25-005600 |
| 477 | Hinge bracket | 25-013500 |
| 478 | Mounting kit | 26-058600 |
| 479 | Hinge bracket | 26-088500 |
| 480 | Mounting kit | 26-052800 |
| 481 | Bushing, Ø 32 mm without slot | 18-055100 |
| 482 | Bushing, Ø 34 mm without slot | 18-055300 |
| 483 | Bushing, Ø 32 mm without slot | 18-055200 |
| 484 | Bushing Ø 34 mm with slot | 18-055400 |
| 485 | Drawbar attachment trailer | 26-057300 |
| 486 | Sleeve for welding trailer bracket BRIAB | 25-064800 |
| 487 | Spacer kit for rear bracket Optimal drawbar | 25-088378 |
| 488 | Eye | 15-015700 |
| 489 | Clamp, x2 | 15-022700 |
| 490 | Monting plate 165×165 mm | 15-022500 |
| 491 | Bolt kit | 15-020400 |
| 492 | Slotted bushing, 40 mm (fts to drawbar eye 17-012900, 17-013000) | 18-013800 |
| 493 | Slotted bushing, std dim. (fts to drawbar eye 16-089500, 16-088500) | 18-088800 |
| 494 | 10-p | 18-088801 |
| 495 | Non-slotted bushing, std dim (fts to drawbar eye 16-091700, 16-089500, 16-088500) | 18-088600 |
| 496 | Wear ring 57.5 mm (fts to drawbar eye 15-017300, 15-018500, 15-018800, 15-016000, 15-019000) | 18-010400 |
| 497 | 10-p | 18-010401 |
| 498 | Castle nut kit | 18-002800 |
| 499 | Bolt kit for drawbar eye 190 (6 pcs.) | 15-019200 |
| 501 | Bolt kit for drawbar eye 917 (8 pcs.) | 15-020600 |
| 502 | Wear gauge for Ø 50 and Ø 57 mm couplings/eyes. Plastic | 18-004700 |
| 503 | Wear gauge For Ø 50 and Ø 57 mm couplings/eyes. Steel | 18-004600 |
| 504 | Insert 14-terminal, incl. screws | 28-029100 |
| 505 | Insert 17-terminal, incl. screws | 28-029300 |
| 506 | Mounting kit | 28-062500 |
| 507 | Lock hook | 28-027600 |
| 508 | Insert 14-terminal, incl. screws | 28-033800 |
| 509 | Insert 17-terminal, incl. screws | 28-033900 |
| 510 | Mounting kit, | 28-062600 |
| 511 | Electrical heating coil | 28-029900 |
| 512 | Insert SAL 14-terminal incl. screws | 28-034200 |
| 513 | Insert SAL 17-terminal incl. screws | 28-034700 |
| 514 | Installation kit Ø9-15 mm, includes | 28-063600 |
| 515 | Installation kit Ø10.5-17 mm, includes | 28-035900 |
